Skip to content

Linear Pattern

Copies features along one or two directions.

Features tab > Linear Pattern, or Insert > Pattern/Mirror > Linear Pattern.

The Linear Pattern page beside a part with a row of patterned holes.

Creating a Linear Pattern

  1. Select the features to pattern in the design tree or the graphics area. You can also select them after the page opens.
  2. Click Linear Pattern.
  3. Select the Direction, or click X axis, Y axis or Z axis.
  4. Set the Spacing and Instances. The preview updates as you type.
  5. Click OK or press Enter.

Extrusions, revolves, sweeps, helical sweeps, lofts, threads, holes, fillets, chamfers, patterns and mirrors can be patterned. Each copy adds or removes material as its seed does.

Direction 1

Direction
A linear edge, a planar face or plane (along its normal), a cylindrical face or circular edge (along its axis), or a reference axis. The X, Y and Z axis buttons use an axis through the origin; the one in use shows pressed, and the page shows "Using the X axis". Pointing at a button shows its axis in the graphics area. The default is the X axis.
Reverse direction
Patterns the other way along the direction.
Spacing
The distance between neighboring instances, in the part's units. Accepts an equation or a variable name.
Instances
The number of instances along the direction, the seed included. Default 3.

Direction 2

Use direction 2
Adds a second direction, which makes a grid of instances. Starts on the Y axis. Clicking an axis button turns it on.
X axis, Y axis, Z axis
The second direction. Direction 2 takes only these axes, not selected geometry.
Reverse direction
Patterns the other way along direction 2.
Spacing
The distance between neighboring rows, in the part's units.
Instances
The number of rows along direction 2, the first included. Default 1, so set it above 1 to see the second direction.

The total number of instances, the seed included, must be between 1 and 2000.

Instances to Skip

Instances

Instances to leave out, as numbers and ranges such as 2, 5, 7-9. The seed is instance 1. With two directions, numbering runs along direction 2, then row by row along direction 1. Numbered markers show the instances in the graphics area; click one to add it to the list or remove it.

A grid pattern with its numbered instance markers, instances 2 and 5 skipped.

Features to Pattern

Features
The seed features. Select them in the design tree or the graphics area; selecting a face selects the feature that created it. Sketches are not added.

When a Linear Pattern Fails

The page shows the reason when the pattern cannot be built. An instance whose copy cannot be applied to the body is left out, and the feature shows a warning. A suppressed seed is left out with a warning; with all seeds suppressed, the pattern is suppressed too.

See Also