Skip to content

Sub-assemblies

Forms new sub-assemblies from components, replaces components, and opens, edits and restructures the sub-assemblies an assembly holds.

Assembly tab > Form Sub-assembly or Replace Component. The two share a split button, which shows the one used last; its arrow shows the other. Both are also on a component's right-click menu as Form New Sub-assembly… and Replace Component….

A sub-assembly is inserted like a part, with Insert Components, or formed from components already in the assembly.

Forming a Sub-assembly

  1. Select one of the components in the design tree or the graphics area.
  2. Click Form Sub-assembly. The page is titled Form New Sub-assembly, with the selected component checked.
  3. Check the other Components to move into it.
  4. Set the Options.
  5. Click OK or press Enter. Unless Embed in this assembly is on, a Save dialog asks for the new sub-assembly's file.

The Form New Sub-assembly page with three components checked, beside the assembly.

The components keep their positions, and the new sub-assembly sits at the assembly's origin. Mates between the checked components move into the sub-assembly; mates from them to other components stay in the assembly, now on the sub-assembly's components. If none of the checked components is fixed, the first becomes fixed in the sub-assembly; the sub-assembly is fixed in the assembly if any of them was.

Components

Components
A check box for each of the assembly's own components. Components of a component pattern, seeds or copies, are not listed; delete the pattern first. On their right-click menu, Form New Sub-assembly… is unavailable.

Options

Embed in this assembly
Stores the sub-assembly inside the assembly's file instead of a file of its own. Off by default.
Solve as
Option Result
Flexible The sub-assembly's mates are solved in this assembly, so its components stay free to move as they do now. The default
Rigid The sub-assembly moves as one body

Replacing a Component

  1. Select a component of the assembly itself, not one inside a sub-assembly.
  2. Click Replace Component.
  3. Select the part or assembly file to use instead.
  4. If the assembly holds several instances of the component, click All Instances or This Instance.

The new component takes the old one's place, mates and link type: a linked component stays linked, an embedded one is embedded. It is renamed after the new file, such as Bracket-B<1>. Configurations, poses and display overrides set for the old file are dropped. A mate whose face the new component lacks shows as an error; right-click it under Mates > Repair….

In the Design Tree

A sub-assembly's row has an arrow that shows its components under it. Its note says flexible or rigid, its configuration if one is set, and embedded, missing or missing, cached copy where that applies. A flexible sub-assembly shows in red when one of its mates is not satisfied.

The design tree with a flexible sub-assembly expanded, one of its components marked overridden.

Opening and Editing

Double-click a sub-assembly, or right-click it > Open Sub-assembly, to open its file in a tab of its own. The Open Part command on the Assembly tab does the same for the selected component.

An embedded sub-assembly has Edit Sub-assembly instead. It opens in its own tab; Save writes it back into the assembly and saves the assembly, and Save As makes it a file of its own, no longer tied to the assembly. A part or sub-assembly embedded inside another sub-assembly can be edited this way only if every sub-assembly above it is embedded too.

A sub-assembly's component also has Open Sub-assembly or Edit Sub-assembly for the sub-assembly holding it.

The Sub-assembly's Menu

Right-click a sub-assembly of the assembly for:

Make Flexible, Make Rigid
Changes how the sub-assembly is solved, as Solve as above.
Configuration
As Saved or one of the sub-assembly's configurations, for this instance. Shown when the sub-assembly has more than one configuration.
Dissolve Sub-assembly
Replaces the sub-assembly with its components, each where it is, as this instance shows them. A flexible sub-assembly's mates come along. A rigid one's components are locked to its first component with Lock mates, and its own mates come along suppressed. Mates to the sub-assembly's origin planes are kept only if it sat at the assembly's origin; the others are dropped and a note under the tree says how many.

A Sub-assembly's Components

Hide, Show, Suppress, Unsuppress, Isolate and Appearance… on a component inside a sub-assembly apply to this assembly only; the sub-assembly's file is not changed. The component's note then says overridden.

Move Out of Sub-assembly
Moves a component of a sub-assembly one level down into this assembly, where it is now. Its mates in the sub-assembly come along.
Move to Sub-assembly
On a component of this assembly: moves it into the sub-assembly named, where it is now. Mates between it and that sub-assembly's components move into the sub-assembly. Shown when the assembly holds a sub-assembly that is loaded.

Both moves save the sub-assembly and cannot be undone; a dialog asks first. A sub-assembly with a file of its own is saved to that file, which changes every assembly that uses it. Components of a pattern cannot be moved.

See Also