Skip to content

Title Block

Most of a drawing's title block fills itself in from the sheet, the drawing and the model. A few fields, such as the company and who drew, checked and approved the drawing, are typed in for each drawing.

Filling In the Title Block

Right-click the drawing's row at the top of the design tree > Properties…, or File > Properties….

The Properties dialog lists one row for each field the sheet format leaves to the drawing. In SpryCAD's ISO and ANSI formats these are:

Name Shown in the title block as
Company Company
DrawnBy Drawn by
CheckedBy Checked by
ApprovedBy Approved by

Type the values and click OK. The title block shows them at once, on every sheet. Add Property adds a row of any other name, which the title block shows if its format has a text with that field, such as {Project}. Changing the properties is one undo step.

A drawing's own value wins over the model's property of the same name. For example, a Description typed here replaces the part's description in the title block of this drawing only.

Fields Filled In Automatically

Each field is written in the format's text as {Name}:

From the model
The properties of the model the sheet's first view shows, set in that part's or assembly's File > Properties…: {PartNumber} (the model's file name when it has none), {Description}, {Material}, {Finish} and any other. Also written {Model.Description} and so on, with {Model.Revision} and {Model.Version}.
From the sheet
{Scale}, {Sheet}, {SheetCount}, {Projection} and {Units}.
From the drawing
{Revision} (- until the drawing is released), {Version} and {Date} (the date it was saved, today until then).

To change a part number, description or material, change it in the model. The drawing follows it.

Using the Values in Every New Drawing

To avoid typing the company in each drawing, save the values in a drawing template:

  1. Fill in the title block as above.
  2. On the Sheet Format tab, click Save as Template, and give the template a name.

The template keeps the sheet's format and size, the drafting standard and the title block values that are filled in. It is saved in the company standards library, so it is offered under Template when anyone creates a drawing. Publish a company standards library first, from Tools > Libraries > Edit Standards Library.

Adding a Field of Your Own

  1. Right-click a sheet in the design tree, or its tab below the graphics area, > Edit Sheet Format. The Sheet Format tab of the command panel is shown alone.
  2. Click Text and place a text where the field goes, or right-click an existing text > Properties….
  3. Set its Text to the field alone, such as {Project}. Property inserts one of the fields there are.
  4. Select Filled in by each drawing.
  5. Click Done.

The field now has a row in File > Properties… of each drawing that uses the format. To share the format with other drawings, click Save Format to Library.