Sheets¶
A drawing has one or more sheets. Each sheet has its own name, paper size, scale, projection angle and sheet format.
Sheet Format tab > Add Sheet and Sheet Properties, or right-click a sheet's tab below the graphics area.
img/drawings/sheets-tabs.png
A drawing with three sheets: the sheet tabs at the lower left of the graphics area, one tab's right-click menu open.
The Sheet Format Tab¶
| Command | Does |
|---|---|
| Add Sheet | Adds a sheet with the current sheet's size, format, scale and projection angle |
| Sheet Properties | Sets the current sheet's name, size, scale, projection angle and format |
| Edit Sheet Format | Edits the lines and text of the current sheet's format. See Sheet Format |
| Save Format to Library | Saves the sheet format to the company standards library. See Sheet Format |
| Save as Template | Saves the format, size, drafting standard and title block values as a drawing template. See Sheet Format |
Save Format to Library and Save as Template share a split button, which shows the one used last.
Sheet Tabs¶
The sheet tabs are at the lower left of the graphics area, one for each sheet in the drawing's order. The tab of the sheet shown is highlighted. Hover over a tab to see the sheet's size and scale.
- Click a tab to show its sheet.
- Double-click a tab to rename the sheet.
- Click + after the last tab to add a sheet.
- Right-click a tab for the sheet's menu. The sheet is shown first.
Each sheet is also a row in the design tree, as Sheet1 (A3, 1:1), with its views and sketches under it. Click
the row to show the sheet, and right-click it for the same menu as its tab.
| Menu item | Does |
|---|---|
| Rename… | Asks for a new name |
| Sheet Properties… | Opens Sheet Properties |
| Edit Sheet Format | Opens the sheet's format for editing. Unavailable while a format is being edited |
| Move Left, Move Right | Moves the sheet one place in the order. In the design tree: Move Up, Move Down |
| Add Sheet | Adds a sheet after the last one |
| Delete Sheet | Deletes the sheet. Unavailable when the drawing has one sheet |
The order of the sheets is the order of the tabs and the design tree, and sets each sheet's number, {Sheet} in the
title block.
Add Sheet¶
Adds a sheet after the last one, named Sheet1, Sheet2 and so on, and shows it. It takes the current sheet's size, sheet format, scale and projection angle.
Sheet Format tab > Add Sheet, + after the sheet tabs, or right-click a sheet's tab, the drawing's row in the design tree, or an empty area of the sheet > Add Sheet.
Delete Sheet¶
Deletes the current sheet with its views, annotations and sketches, and shows the first sheet. There is no confirmation; press Ctrl+Z to undo it.
Right-click the sheet's tab or its row in the design tree, or an empty area of the sheet, > Delete Sheet, or select its row in the design tree and press Del.
Sheet Properties¶
Sets the current sheet's name, size, scale, projection angle and format.
Sheet Format tab > Sheet Properties, or right-click the sheet's tab, its row in the design tree, or an empty area of the sheet > Sheet Properties….
img/drawings/sheets-properties.png
The Sheet Properties dialog: Name, Size with the custom width and height, Scale, Projection and Sheet format.
- Name
- The sheet's name, shown on its tab and in the design tree. Required.
- Size
- The paper size, listed with its dimensions in the drawing's units, such as ANSI B – Tabloid (17 × 11 in). Custom enables the width and height boxes below it. A custom size must be at least 50 × 50 mm, or 2 × 2 in in an inch drawing. See Sheet Sizes.
- Scale
- The scale of the sheet's views, written
1:2or2:1. Choose a standard scale from the list, or type any scale in the box beside it. Views follow the sheet's scale unless they have a scale of their own, set with right-click a view > Scale…. The scale is shown in the title block as{Scale}. - Projection
- First angle or Third angle. See Projection Angle.
- Sheet format
- The border and title block. The list holds the drawing's own formats first, then SpryCAD's ISO and ANSI formats, then the formats of the company standards library, each shown with the library's name. Choosing another format for the first sheet also changes the drawing's units to that format's units.
Click OK to apply the changes as one undo step. If a value is not valid, the dialog says why and stays open.
Sheet Sizes¶
SpryCAD offers these sizes, all landscape unless the name says portrait:
| Standard | Sizes |
|---|---|
| ISO 216 | A4, A4 portrait, A3, A2, A1, A0 |
| ANSI (ASME Y14.1) | ANSI A (Letter), ANSI A portrait, ANSI B (Tabloid), ANSI B portrait, ANSI C, ANSI D, ANSI E |
| US Legal | Legal, Legal portrait |
| Architectural | ARCH A, ARCH B, ARCH C, ARCH D, ARCH E |
A company standards library can replace this list with its own sheet-size tables. A new drawing starts on A3 in millimeters and ANSI B in inches, unless its template or the size used last says otherwise.
The sheet format stretches to every size: its border keeps its margins from the paper's edge, and its title block stays in the border's lower right corner.
Scale¶
The sheet's scale is the scale its views are drawn at. Changing it redraws every view that has no scale of its own. Standard 3 View sets the sheet's scale to the largest standard scale at which the views fit. The standard scales are 10:1, 5:1, 2:1, 1:1, 1:2, 1:2.5, 1:5, 1:10, 1:20, 1:50 and 1:100.
Projection Angle¶
The projection angle sets which side of the model a projected view shows:
| Angle | A view placed to the right of the front view shows | Usual with |
|---|---|---|
| Third angle | The right side | ASME, North America |
| First angle | The left side | ISO, Europe |
Changing it on a sheet leaves its projected views in their places; each then shows the side its place has in the new
angle. Standard 3 View lays out its views by it, and the title block shows it as {Projection} and as the
projection symbol.
A new drawing's first sheet takes the projection angle of its sheet format. An added sheet takes the current sheet's.