Skip to content

Layers

Groups a drawing's annotations and sketches so they can be shown, hidden or left out of printouts together, such as construction notes that stay on screen only.

Drawing tab > Layers, or right-click the drawing's row at the top of the design tree > Layers….

img/drawings/layers-page.png

The Layers page with two layers, one with Prints cleared, and Current layer set under New Annotations and Sketches.

Adding a Layer

  1. Click Layers.
  2. Click Add Layer. A layer named Layer1 (then Layer2, and so on) is added.
  3. Type a name over it.
  4. Set Current layer to the layer, so new annotations and sketches go on it.
  5. Click OK.

Changes show on the sheet as they are made. OK keeps them as one undo step; Cancel puts the layers back as they were.

Layers

One row for each layer:

Name
The layer's name. Renaming a layer keeps what is on it. A name already in use, or an empty one, is not taken.
Shown
Shows the layer's annotations and sketches on the sheet. A layer that is not shown is not printed either.
Prints
Includes the layer in PDF, SVG and DXF files and in printouts. Cleared, the layer is shown on screen only.
Delete
Deletes the layer. Its annotations and sketches stay, on no layer.
Add Layer
Adds a layer, shown and printed.

Annotations and sketches on no layer are always shown and printed.

New Annotations and Sketches

Current layer
The layer new annotations and sketches go on: No layer or one of the drawing's layers. Balloons and tables added by a command go on it too.

Moving an Annotation to Another Layer

Select the annotation. Once the drawing has layers, the page of a dimension, note, balloon or symbol has Layer under Text Format. Center marks, centerlines, tables and sketches keep the layer they were added on. See Annotations.

DXF files have layers of their own, named after line types (VISIBLE, THIN, HIDDEN, CENTER, PHANTOM, TEXT). The drawing's layers decide only what is exported, not which DXF layer it goes on.