Skip to content

Insert Library Part

Inserts a part from the parts libraries into the assembly, in the size you pick. A library part is an ordinary part file kept in a parts library. Its sizes are its own design tables and user values, the same choices Configure offers for any part.

Assembly tab > Insert Library Part.

Inserting a Part

  1. Click Insert Library Part.
  2. Select a part in the list. Parts are listed by category; type in the search box to find one by name, description or category.
  3. Under Size, pick a row of each design table and type each user value. The preview shows the part in that size, in its material and colors. Click the preview for a larger view to turn and zoom.
  4. Click Insert, or double-click the part. The part is embedded in the assembly beside the other components. Drag it into place, or mate it.

To change its size later, select it and click Configure.

A part with a placement can also be placed on holes and shafts, sized and mated, with Insert Standard Part.

A design table that reads its rows from a library table is read again when the part is inserted, so the part has the library's sizes of now. Parts already in an assembly keep the rows they were inserted with.

Adding Parts to a Library

Make Library Part
Right-click an open part (in the graphics area, or its row at the top of the design tree), or click Tools > Libraries > Make Library Part. Give it a name, a category such as Fixtures / Clamps and a description. The dialog lists the sizes the part offers. Publish the library in the Library editor to share it.
Add Part
In Tools > Libraries > Edit Parts Library, click Add Part and select a part file.

A part with no design tables or user values has one size. To offer sizes, open the part and, in Tools > Parameters:

  • add a design table, one row per size;
  • click Add Table from Library for a design table whose rows are a library table's, such as a standard's sizes. The table's columns set the part's variables of the same name;
  • or mark variables User, with limits if you like, for sizes typed in freely.

Editing Library Parts

In the parts library editor, select a part to see its preview and sizes.

Size Tables
The rows of the part's design tables, one row per size. In your own library's part, click a cell to change it, click + Row to add a size (a copy of the selected row) or Delete Rows to remove the selected ones. Each change is saved in the part; publish the library to share it. Tables read from a spreadsheet or a library table are shown read-only.
Open Part
Opens the part in a tab. Each save there updates the part in the editor; publish the library to share it. A save after the editor is closed asks whether to publish the part to its library.
Replace Part
Loads a part file in its place.
Hide Part
Stops a part of a library below (SpryCAD's, a vendor's or the company's) being offered. Show Part offers it again.

A part of the same name in your library is used in place of one below it.

See Also